If RDP is installed your connection will look like this: Now RDP 8 and Lync VDI client are installed on the Wyse terminal.I ran the command lyncvdi.exe /extract:pathfolder and then ran the installer from the USB. The plug-in needs to be extracted to a flash drive, before being installed in the physical VDI hardware.In other words, the x32 Wyse, means I am using a VM that is 32 bit windows 8, with lync 32 bit client installed. Warning: the VDI client and the physical client must be on the same “bitness”.This Lync 2013 plug-in will be X32 or X64 The next update is to the VDI (Wyse machine) client.This should be a red ICON on the desktop. administrator and Wyse#123 for the password Boot WYSE to admin mode (hold down the shift key after splash and hold until you admin login.

Here are the sub steps for the two needed updates: Please keep in mind the Wyse updates procedure requires 3-4 restarts in and out of admin mode.The Wyse client needs the latest update ( KB2574819).This includes any windows 7 machines, including a VDI client like WYSE- running Windows 7 embedded. The Server for Lync Needs to be 2012 or, if you have 2008 R2 server, updates for Server 2008 R2 and windows 7 need to be applied.With this in place, the steps to get Lync 2013 running across multiple virtualization technologies with RDP 8 is laid out as follows. Prerequisites include a fully functional Lync environment with correct EWS functionality. Lync 2013 is on Server 2012 as well and July updates have been applied. All but the embedded machine support RDP 8.0 natively. I have Server 2012 on all servers, Windows 7 SP1 embedded is running on the WYSE, and the VM is going to be windows 8. My particular set up was a VDI in a box 5.3 setup with Hyper-V as the hypervisor. In this article WYSE refers to the physical client and VDI client refers to the virtual machine that will run on the Wyse. In my instance, I used a WYSE X90M7 thin client with Windows 7 Embedded as the Operating System. Please follow vendor specific information to determine the way your particular thin client needs to be provisioned. The difficulty of setting up a virtualized client to function with Lync 2013 was the order of steps then the method used to install the necessary bits.

Install lync 2016